Need to nullify your Holosun EPS Carry Red Dot's settings? A factory reset will be just the solution.
Ahead of you begin, make certain your optic is powered off. Now, let's dive into the process:
- Hold down both the up and down controls simultaneously.
- As you keeping those buttons held, activate the power switch on your Holosun EPS Carry Red Dot.
- You'll enter a flashing indicator, showing that the reset procedure is running.
- Sustain holding the buttons for roughly 5 seconds. Then, release both buttons.
- Your settings are now reset to their factory defaults.
You can customize your Holosun EPS Carry Red Dot to your desired setup.
Adjusting Your Holosun EPS Carry to Default Settings
Sometimes your Holosun EPS Carry optic might require a recalibration to its default settings. This is typically done when the optic's performance is unexpected. There's how to reset your Holosun EPS Carry:
- , Start by powering off your optics
- Locate the small switch on the rear of the optic.
- Pressduring this control for approximately several seconds. This will initiate a full system recalibration
- Once the optic's display flashes that it has been reset, you can let go of the switch and power it back on.
Your Holosun EPS Carry should now be operating at its default settings. You can then follow the manufacturer's guidelines for adjusting reticles your optic to your specific weapon system.
Reset Your Holosun EPS Carry: A Step-by-Step Factory Procedure
Need to get your Holosun EPS Carry back to its default settings? A factory reset can be a helpful solution when you're experiencing issues or simply want a clean slate. Thankfully, the process is straightforward.
- Begin by powering off your Holosun EPS Carry.
- Next, hold down the Function switch and Engage the power switch/button.
- Continue holding both keys for approximately 10 milliseconds until you see a blinking light on the display.
- Release both buttons/keys to confirm the factory reset. Your Holosun EPS Carry will now be back to its original settings.
Restore Factory Settings : Holosun EPS Carry Red Dot
Resetting your Holosun EPS Carry red dot optic to factory defaults can be a valuable tool for troubleshooting issues or refreshing its performance. This process thoroughly erases all customized settings, returning the device to its original configuration.
To initiate this reset, you'll need to access the designated button on your Holosun EPS Carry. Consult your user How to factory reset holosun eps carry red dot guidebook for precise information. Generally, a short press and hold of this button will initiate the factory reset process. You'll likely see a sequence of visual cues to confirm that the reset is effectively in progress.
Completing a Factory Reset for the Holosun EPS Carry Sight System
If you're having issues with your Holosun EPS Carry Sight System or simply want to revert it to its original settings, a factory reset might be the solution. This process will thoroughly erase all user-configured settings and restore the sight system to its initial state. Before proceeding, confirm you understand that this action is irreversible and will delete any personalized adjustments you've made.
For perform a factory reset, follow these instructions:
- Firstly locating the reset button on your Holosun EPS Carry Sight System.
- Then, apply a small, pointed object like a pen or paperclip to depress the reset button.
- Keep pressed the reset button for approximately 5 units of time.
- Your sight system will indicate a message indicating that the factory reset is done.
- Upon completion of the reset, your Holosun EPS Carry Sight System will go back to its original settings.
Default Reset for Your Holosun EPS Carry Effortlessly
Resetting your Holosun EPS Carry to factory settings is a simple process that can solve any issues you may be facing. Here's how to execute a quick and easy reset:
- Initially turning your Holosun EPS Carry active.
- Subsequently, press and hold the mode button for approximately 5 seconds.
- You'll a flashing light or display, showing that the reset is progressing.
- Maintain holding the button until the configuration are confirmed.
- Its Holosun EPS Carry will now be reset to factory settings.